Atlas . Bolet
20 years service experience in press industry
Contact information
Atlas Bollett

Complete machine consultation: 150-0028-5604

Service consultation: 152-2164-0839

400 咨询:400-169-8060

The email address is bolaite-air@139.com

Shanghai Headquarters: Building 3, No.58 Caoli Road, Fengjing Town, Jinshan District, Shanghai

How to correctly set the operating parameters and start and stop of Bolet air compressor

Time: 2023-01-06 Views: 1616 times

One: Set the operating parameters of the air compressor
1.If it is belt drive, check the tightness before starting。Generally, the tightness is between 10mm and 20mm。If it is a coupling connection, check the balance。
2.Check whether the host steering is the same as the mark, and adjust the phase sequence of the two wires differently。
3.First set the unload value, then determine the load value。Generally unloading is 0 greater than loading.1~0.2Mpa。

4.The normal exhaust temperature should be about 90 degrees, the high temperature warning temperature should be set at 105 degrees, and the high temperature shutdown temperature should be set at about 110 degrees。

Bolet air compressor

Two: Adjust the start and stop of air compressor
Under normal circumstances, the automatic start and stop of the screw machine is controlled by pressure, setting the upper and lower limits of pressure, and operating through the pressure sensor。When the pressure reaches the upper limit, the air compressor automatically stops, and when the pressure drops to the lower limit, the air compressor starts and resumes work。
After adjustment, enter the setting diagram through the microcomputer controller, you can adjust the upper and lower limits of pressure, generally do not need a password to enter the air compressor setting page。There are two methods of air compressor pressure regulation:
1. Adjust the air compressor pressure
(a) Turn the pressure adjusting screw clockwise to increase the closing and breaking pressure simultaneously;
(b) Turn the pressure adjusting screw counterclockwise to simultaneously reduce the closing and breaking pressure。
2. Differential pressure adjustment
(a) Rotate the differential pressure adjustment screw clockwise, the closing pressure remains unchanged, and the breaking pressure increases;
(b) Rotate the differential pressure adjustment screw counterclockwise, the closing pressure is unchanged, and the breaking pressure is reduced。

Copyright ©2020 Atlas Bolet (Le Le) All rights reserved Keywords: screw air compressor Oil free air compressor air compressor accessories

Technical support:Suzhou Shangyun Network Technology Co., LTD Record number:Shanghai ICP for 16021029

" class="hidden">仁寿在线